Arrow Fastener S1250F-BRZ

Arrow S1250-F-BRZ Rim Exit Device User Manual

Model: S1250F-BRZ | Brand: Arrow Fastener

1. Ներածություն

This user manual provides essential information for the proper installation, operation, and maintenance of the Arrow S1250-F-BRZ Rim Exit Device. This device is designed for commercial applications, providing reliable and secure egress solutions.

Please read this manual thoroughly before attempting any installation or operation to ensure safety and optimal performance of the product.

2. Կարգավորում և տեղադրում

The Arrow S1250-F-BRZ Rim Exit Device is intended for professional installation due to its application in commercial environments and the precision required for proper function and security. While specific detailed steps are provided with the product packaging, this section outlines general considerations.

2.1 Բաղադրիչներ

  • 36" Latch
  • Մոնտաժային սարքավորում
  • Rim Exit Device Assembly

2.2 Ընդհանուր տեղադրման քայլեր

  1. Դռների պատրաստում. Ensure the door is properly prepared according to the provided templates, including drilling holes for mounting and the latch mechanism.
  2. Սարքի տեղադրում. Secure the main body of the rim exit device to the interior side of the door using the supplied mounting hardware. Ensure it is level and aligned correctly with the door edge.
  3. Connecting the Latch: Install the 36" latch mechanism, ensuring it aligns with the strike plate on the door frame.
  4. Փորձարկման գործողություն. After installation, thoroughly test the device to ensure smooth operation of the push bar and proper latching/unlatching. Verify that the device provides free egress when the push bar is depressed.
  5. Վերջնական ճշգրտումներ. Make any necessary adjustments to ensure the device operates without binding and provides secure closure.
Arrow S1250-F-BRZ Rim Exit Device, dark bronze finish

Figure 1: The Arrow S1250-F-BRZ Rim Exit Device. This image displays the long, dark bronze-colored bar with a latch mechanism on the right end, designed for commercial door applications.

3. Գործառնական հրահանգներ

The Arrow S1250-F-BRZ Rim Exit Device is designed for intuitive and reliable operation, primarily for emergency egress.

3.1 Egress Operation

To exit through a door equipped with this device:

  • Simply push the horizontal bar (push bar) located across the width of the door.
  • Applying pressure to the push bar will retract the latch bolt, allowing the door to open.
  • Release the push bar to allow the latch bolt to extend and secure the door.

3.2 Entry Operation (if applicable)

Entry from the exterior typically requires a key or other access control mechanism, depending on the specific trim installed with the exit device. Refer to the instructions for your exterior trim for entry procedures.

4. Պահպանում

Regular maintenance ensures the longevity and reliable operation of your Arrow S1250-F-BRZ Rim Exit Device.

4.1 Մաքրում

  • Մաքրեք արտաքին մակերեսները փափուկ,amp կտոր.
  • Խուսափեք հղկող մաքրող միջոցներից կամ լուծիչներից, քանի որ դրանք կարող են վնասել մակերեսը։

4.2 Քսում

  • Periodically apply a small amount of silicone-based lubricant to moving parts, such as the latch bolt and internal mechanisms, if they feel stiff.
  • Do not over-lubricate, as this can attract dust and debris.

4.3 Ստուգում

  • Regularly inspect all mounting screws and fasteners to ensure they are tight. Loose fasteners can affect performance and security.
  • Check for any signs of wear, damage, or misalignment. Address any issues promptly to prevent further damage or malfunction.
  • Ensure the push bar operates smoothly and returns to its original position without sticking.

5: Անսարքություն

This section provides solutions to common issues you might encounter with your rim exit device.

ԽնդիրՀնարավոր պատճառԼուծում
Device does not latch properly.Misalignment with strike plate, worn latch bolt, loose mounting screws.Check alignment of device and strike plate. Tighten all mounting screws. Inspect latch bolt for wear; replace if necessary.
Push bar is stiff or sticky.Lack of lubrication, accumulation of dirt/debris, bent push bar.Clean the device thoroughly. Apply silicone-based lubricant to moving parts. If the bar is bent, professional repair or replacement may be needed.
Door does not open when push bar is depressed.Internal mechanism failure, obstruction, incorrect installation.Inspect for any visible obstructions. If the device was recently installed, review installation steps. For internal mechanism issues, contact a qualified locksmith or the manufacturer.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact customer support or a qualified professional.

6. Տեխնիկական պայմաններ

Key technical specifications for the Arrow S1250-F-BRZ Rim Exit Device:

  • Ապրանքանիշը: Սլաքի ամրակ
  • Մոդելի համարը: S1250F-BRZ
  • Մասի համարը: S1250-F-BRZ
  • Կողպեքի տեսակը: Rim Lock
  • Նյութը՝ Բրոնզ
  • Գույնը: Բրոնզ
  • Առաջարկվող կիրառումներ. Առևտրային տարածքներ
  • Վերահսկման մեթոդ. Touch (Push Bar)
  • Ներառված բաղադրիչներ. 36" Latch, Mounting Hardware
  • Նյութի Փաթեթի Քանակ: 1
  • Արտադրող: Arrow Lock
  • ASIN: B00ITLG8VM

7. Երաշխիքային տեղեկատվություն

Warranty details for the Arrow S1250-F-BRZ Rim Exit Device are typically provided with the product at the time of purchase. Please refer to the documentation included in your product packaging for specific warranty terms, conditions, and duration.

For warranty claims or inquiries, retain your proof of purchase and contact the manufacturer directly.

8. Հաճախորդների աջակցություն

If you require further assistance, have questions about your Arrow S1250-F-BRZ Rim Exit Device, or need technical support, please contact Arrow Fastener customer service.

You can often find contact information, FAQs, and additional resources on the official Arrow Fastener webկայքը:

Visit the Arrow Fastener Store on Amazon

When contacting support, please have your product model number (S1250F-BRZ) and ASIN (B00ITLG8VM) ready.

© 2024 Arrow Fastener. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.