Rain Bird SST900IN

Rain Bird SST900IN 9-Zone Indoor Sprinkler System Controller User Manual

Model: SST900IN

1. Ապրանքը ավարտված էview

The Rain Bird SST900IN is a 9-zone indoor sprinkler/irrigation system timer/controller designed for residential use. It features intuitive zone-by-zone programming, allowing for customized watering schedules tailored to specific areas of your yard. This model replaces the SST900I and includes enhanced features for efficient water management.

Rain Bird SST900IN 9-Zone Indoor Sprinkler System Controller

Figure 1: Rain Bird SST900IN 9-Zone Indoor Sprinkler System Controller.

Ներառված բաղադրիչներ.

  • Rain Bird SST900IN Timer/Controller
  • CR2032 lithium ion backup battery
  • Transformer power plug with 6' cord
  • Տեղադրման ուղեցույց (այս ձեռնարկ)

2. Կարգավորում և տեղադրում

The SST900IN controller is designed for indoor installation within a garage, home, or waterproof shed. Installation typically requires only a screwdriver.

Տեղադրման քայլեր.

  1. Record Old Settings: Before disconnecting an old timer, note down all existing settings including start times, run times, and watering days for each zone. This information will be used for programming the new SST900IN controller.
  2. Անջատել սնուցումը. Unplug the power supply to the old timer.
  3. Պիտակի լարեր՝ Label each sprinkler wire with a small piece of tape corresponding to its zone number.
  4. Անջատեք լարերը՝ Carefully disconnect all sprinkler wires from the old timer.
  5. Remove Old Timer: Remove the mounting screws and take the old timer off the wall.
  6. Mount New Timer: Hang the new SST900IN controller in its place and secure it using the provided mounting screws.
  7. Միացնել լարերը. With the wire cover removed, connect each labeled sprinkler wire to the corresponding numbered zone terminal on the new controller. Connect the common wire to the common terminal.
  8. Միացրեք հոսանքը. Attach the power transformer to the controller and plug it into a nearby 120 VAC outlet.
Connecting wires to the Rain Bird SST900IN controller terminals

Figure 2: Wiring connections for the Rain Bird SST900IN controller.

Սկզբնական փորձարկում.

To ensure the timer is connected properly, activate each zone using the 'Water All Zones Now' or 'Water 1 Zone Now' feature. Observe that each zone's sprinklers operate as expected.

Video 1: This official seller video demonstrates the installation and basic programming of the Rain Bird SST timers, including wiring and initial setup steps.

3. Գործառնական հրահանգներ

The SST900IN controller allows for simple, zone-by-zone programming to customize your watering schedule.

Close-up of Rain Bird SST900IN display and control buttons

Նկար 3. մոտիկից view of the SST900IN display and control panel.

Ընթացիկ ժամանակի և ամսաթվի կարգավորում՝

  1. Թվարկիչը դարձրեք դեպի ՍՏԵԵՔ IMEԱՄԱՆԱԿԸ դիրք։ Օգտագործեք Վերին/ներքևի սլաքների ստեղներ to adjust the current time.
  2. Թվարկիչը դարձրեք դեպի ՍԱՀՄԱՆԵԼ ԱՄՍՎԱԾ դիրք։ Օգտագործեք LEFT UP/DOWN arrows to set the year, and the RIGHT UP/DOWN arrows to set the month and day.

Scheduling Watering:

Program each zone individually for precise control.

  1. Turn the dial to select the desired zone (e.g., Zone 1, Zone 2, etc.).
  2. Օգտագործեք LEFT UP/DOWN arrows to set the start time for watering.
  3. Օգտագործեք RIGHT UP/DOWN arrows to set the run time (watering duration) in minutes.
  4. Select watering days:
    • Սեղմեք white RUN DAYS buttons (Sun, Mon, Tue, etc.) to select specific days of the week.
    • Որպես այլընտրանք, սեղմեք կոճակը EVEN/ODD DAYS button to water on even or odd-numbered days of the month.
    • For a cyclic watering schedule, press the CYCLIC WATERING button. Օգտագործեք LEFT UP/DOWN arrows to select the number of days between watering cycles, and the RIGHT UP/DOWN arrows to adjust the date when the first watering session will start.
  5. To enable multiple start times per day (up to four), press the 1st TIME, 2nd TIME, 3rd TIME, or 4th TIME buttons and set the start time and run time for each. The timer automatically orders times from early to later.
  6. Repeat these steps for all remaining zones.

Սեզոնային ճշգրտում.

Adjust watering times for all zones simultaneously to account for seasonal weather variations (e.g., hotter/drier or cooler/rainier periods).

  1. Միացրեք հավաքիչը դեպի ՍԵԶՈՆԱՅԻՆ ԿԱՐԳԱՎՈՐՈՒՄ.
  2. Օգտագործեք Վերև / ներքև սլաքի կոճակներ to adjust the watering time percentage for all zones (from -90% to +100%).
  3. To return to normal watering times, change the percentage back to 0%.

Անձրևի հետաձգում.

Temporarily suspend watering for a set period.

  1. Միացրեք հավաքիչը դեպի ԱՆՁՐԵՎԻ ՈՒՇԱՑՈՒՄ.
  2. Օգտագործեք Վերև / ներքև սլաքի կոճակներ to set the delay time for up to 72 hours. Watering will automatically resume once the delay ends.

Ձեռնարկի շահագործում.

Manually start watering for all zones or a single zone.

  1. Միացրեք հավաքիչը դեպի AUTO RUN.
  2. To water all zones: Press the green 'WATER ALL ZONES NOW' button. The display will show the current watering zone and remaining time.
  3. To water one zone: Turn the dial to select the desired zone. Press the green 'WATER 1 ZONE NOW' button. The display will show the current watering zone and remaining time. The default run time is 10 minutes, which can be adjusted using the Վերև / ներքև սլաքի կոճակներ.
  4. Ձեռքով ջրելը դադարեցնելու համար պտտեք ցուցիչը դեպի ԱՆՋԱՏՎԱԾ. Remember to return the dial to AUTO RUN to resume regular programmed watering.

4. Պահպանում

The SST900IN controller is designed for durability and minimal maintenance.

  • Sealed Case: The sealed case protects internal components from moisture, insects, and grime.
  • Լարման պաշտպանություն. Built-in surge protection guards against damage from lightning strikes or power surges.
  • Հիշողության կրկնօրինակում. All timer settings are stored indefinitely in memory, eliminating the need to re-program in case of a power outage. A CR2032 lithium ion backup battery is included for this purpose.

5: Անսարքություն

The controller features automatic troubleshooting capabilities.

  • Valve/Wiring Short Detection: If a short is detected in a valve or its wiring, the timer will suspend watering to the affected zone and display a warning message with the corresponding valve number. Inspect the wiring and valve for any issues.

6. Տեխնիկական պայմաններ

  • Ապրանքանիշը: Անձրևի թռչուն
  • Մոդել: SST900IN
  • Գոտիներ: 9-Zone/Station
  • Տեղադրում: Փակ
  • Նյութը՝ Պլաստիկ
  • Գույնը: Մոխրագույն/Կանաչ
  • Նյութի Քաշը: 3.74 ունցիա
  • Ցուցադրման տեսակը: LCD կամ LED
  • Գործող ջերմաստիճանը. 10 աստիճան Ցելսիուս (50°F)
  • Էլեկտրական մուտքագրում. 120 VAC / 0.17 AMP / 60 Հց
  • Էլեկտրական ելք. 25.5 VAC / 0.65 AMP / 60 Հց
  • Համատեղելիություն: Most 24 VAC irrigation valves, master valve or pump start relay, rain sensor.
  • Վկայագրեր. UL, cUL certified
  • UPC: 077985004668
Dimensions of the Rain Bird SST900IN controller

Figure 4: Approximate dimensions of the Rain Bird SST900IN controller.

7. Երաշխիք և աջակցություն

This product is covered by a manufacturer's warranty. For specific warranty details and claims, please refer to the warranty information provided with your purchase or contact Rain Bird customer support.

Rain Bird is committed to 'The Intelligent Use of Water™', providing high-quality irrigation products and support.