SAMOTECH SM308-2CH 2-Gang Zigbee Retractable Switch Module User Manual

1. Ներածություն

The SAMOTECH SM308-2CH is a compact and powerful 2-gang Zigbee retractable switch module designed to integrate seamlessly into your smart home ecosystem. Based on the latest Zigbee 3.0 protocol, this module allows you to control two separate lighting circuits or electrical loads, offering advanced features such as active power and energy measurement. It is fully compatible with popular Zigbee gateways like Philips Hue, Home Assistant, HomeKit, SmartThings, and Hubitat, providing flexible control options for your connected devices.

Figure 1: SAMOTECH SM308-2CH 2-Gang Zigbee Retractable Switch Module

2. Ապրանքի հատկությունները

• Zigbee 3.0 արձանագրություն։ Utilizes the latest Zigbee 3.0 standard for reliable and secure communication.
• Երկալիքային ելք՝ Controls two independent circuits with a maximum load of 5.1A per channel.
• Լայն Համատեղելիություն. Fully compatible with Philips Hue, Home Assistant, HomeKit, SmartThings, Hubitat, and other Zigbee 3.0 gateways.
• Բեռնման աջակցություն. Supports both resistive and capacitive loads.
• Touchlink Commissioning: Supports Touchlink for easy pairing.
• Self-Forming Network: Capable of forming a Zigbee network without a coordinator and adding other devices.
• Power & Energy Measurement: Provides active power and energy consumption data.
• Find and Bind Mode: Supports linking with Zigbee remote controls.
• Universal Switch Control: Can be controlled by a universal single-wire push switch, with each channel controllable separately.

3. Անվտանգության տեղեկատվություն

Please read this manual carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other injuries. Always consult a qualified electrician for installation if you are unsure.

• Էլեկտրաէներգիայի անջատում. Ensure the main power supply is turned OFF at the circuit breaker before any installation or wiring work.
• Հատtagե Համատեղելիություն. Verify that the module's operating voltage (AC 100-240V, 50/60Hz) matches your electrical system.
• Բեռի սահմանները. Do not exceed the maximum load ratings (Resistive: max. 5.1A/CH; Capacitive: max. 1.7A/CH) to prevent overheating and damage.
• Միայն ներքին օգտագործման համար. This device is designed for indoor use in dry environments. Avoid exposure to moisture or extreme temperatures.
• Պատշաճ լարերը. Follow the wiring diagrams precisely. Incorrect wiring can cause malfunction or safety hazards.
• Օդափոխում: Ensure adequate ventilation around the module, especially if installed in confined spaces.

4. Փաթեթի բովանդակությունը

• 1 x SAMOTECH SM308-2CH 2-Gang Zigbee Retractable Switch Module
• 1 x Օգտագործողի ձեռնարկ (այս փաստաթուղթը)

5. Տեխնիկական պայմաններ

Figure 3: Dimensions of SM308-2CH Module

6. Տեղադրում և կարգավորում

6.1 Միացման դիագրամ

ԶԳՈՒՇԱՑՈՒՄ. Ensure power is OFF at the circuit breaker before proceeding with wiring. If you are not comfortable with electrical wiring, please consult a qualified electrician.

The SM308-2CH module has terminals for Line (L), Neutral (N), and two switch inputs (S1, S2) and two load outputs (L1, L2). Connect according to the diagram below:

Figure 2: Typical Wiring Diagram for SM308-2CH

• L: Live input from mains.
• N: Neutral input from mains.
• L1: Switched Live output for Load 1.
• L2: Switched Live output for Load 2.
• S1: Input for external switch 1 (connected to Live for control).
• S2: Input for external switch 2 (connected to Live for control).

6.2 Pairing with a Zigbee Gateway (e.g., Philips Hue)

Once the module is wired and power is restored, you can pair it with your Zigbee gateway:

1. Ensure your Zigbee gateway (e.g., Philips Hue Bridge) is powered on and connected to your network.
2. Open your Zigbee gateway's application (e.g., Philips Hue app).
3. Navigate to the "Add Device" or "Add Light" section within the app.
4. On the SM308-2CH module, locate the "Reset" button. Press the "Reset" button չորս անգամ quickly. The module's indicator light should start blinking, indicating it is in pairing mode.
5. The app should detect the new device. For the SM308-2CH, it will typically appear as two separate "lights" or switches, one for each channel.
6. Follow the on-screen prompts in your app to complete the pairing process and assign names to your new switches.

Note: For other Zigbee gateways (Home Assistant, SmartThings, Hubitat), the pairing process will be similar. Refer to your specific gateway's documentation for detailed instructions on adding new Zigbee devices.

6.3 Touchlink Commissioning

The module supports Touchlink for direct pairing with a Zigbee remote control without a gateway. To initiate Touchlink:

1. Bring the Zigbee remote control within 10 cm of the SM308-2CH module.
2. Initiate Touchlink on your remote control (refer to the remote's manual for specific instructions).
3. The module and remote should pair directly, allowing the remote to control the module's outputs.

7. Գործառնական հրահանգներ

Once installed and paired, the SAMOTECH SM308-2CH module can be operated in several ways:

• Via Zigbee Gateway App: Use your smart home app (e.g., Philips Hue, Home Assistant) to turn the connected lights or appliances ON/OFF for each channel independently.
• Ձայնային կառավարում. If integrated with a voice assistant (e.g., Siri via HomeKit, Google Assistant, Alexa), you can use voice commands to control the connected devices.
• External Wall Switch: If wired to traditional wall switches (S1, S2 terminals), you can use these physical switches to toggle the connected loads ON/OFF.
• Zigbee Remote Control: If paired via Touchlink or the gateway, a Zigbee remote can directly control the module.

7.1 Power and Energy Monitoring

The SM308-2CH module provides active power and energy consumption data. This information can typically be viewed within your Zigbee gateway's application, allowing you to monitor the energy usage of the connected devices.

8. Պահպանում

The SAMOTECH SM308-2CH module requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Մաքրում: Disconnect power before cleaning. Use a soft, dry cloth to wipe the module. Do not use liquid cleaners or aerosols.
• Շրջակա միջավայր: Ensure the module is installed in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
• Fրագրակազմի թարմացումներ. Periodically check your Zigbee gateway's application for any available firmware updates for the module. Updates can improve performance and add new features.
• Կանոնավոր ստուգումներ. Occasionally inspect the wiring connections to ensure they are secure.

9: Անսարքություն

10. Երաշխիք և աջակցություն

SAMOTECH products are designed for reliability and performance. For warranty information and technical support, please refer to the official SAMOTECH webկայքում կամ կապվեք ձեր վաճառողի հետ: Պահպանեք գնման ապացույցը երաշխիքային պահանջների համար:

Լրացուցիչ օգնության համար կարող եք այցելել՝ SAMOTECH store on Amazon կամ ուղղակիորեն կապվեք նրանց հաճախորդների սպասարկման հետ։