BRONC RTM-1003-99-4

BRONC Staves Wireless Tattoo Machine User Manual

1. Ներածություն

This manual provides essential information for the safe and effective use of your BRONC Staves Wireless Rotary Tattoo Machine. Designed with advanced technology and a Swiss motor, this pen offers powerful and stable performance. Please read these instructions carefully before operating the device.

The BRONC Staves Wireless Tattoo Machine features a lightweight design, an 1800mAh battery for extended operation, and a Type-C fast charging port. It incorporates an OLED display for clear information and includes safety features such as overload and overcurrent protection.

BRONC Staves Wireless Tattoo Machine in various colors

Նկար 1. Ավարտվածview of the BRONC Staves Wireless Tattoo Machine.

2. Անվտանգության տեղեկատվություն

Always prioritize safety and hygiene when using tattoo equipment. This device is intended for professional use only. Improper use can lead to injury or damage to the machine.

  • Ensure the machine is clean and sterilized according to industry standards before each use.
  • Do not operate the machine if it appears damaged or malfunctioning.
  • Keep the machine away from water and excessive moisture. The device has a water-resistant rating, but it is not waterproof.
  • Use only compatible needle cartridges.
  • Մեքենայի առանձնահատկությունները overload and overcurrent protection, which automatically powers off the device during a malfunction.
  • A 0.2-second 9V jump start feature is included for reliable startup.

3. Ապրանքը ավարտված էview

The BRONC Staves machine is constructed from aircraft-grade aluminum, providing durability and a lightweight feel. It is available in multiple colors.

BRONC Staves Tattoo Machine showing wireless and wired modes

Figure 2: The machine supports both wireless and wired operation via an RCA converter.

Close-up of the BRONC Staves machine's aluminum alloy body

Figure 3: The body is crafted from aviation-grade aluminum alloy for durability.

Ներքին view of the Swiss motor in the BRONC Staves machine

Figure 4: The machine is equipped with a powerful Swiss motor.

BRONC Staves Tattoo Machine in grey, green, black, and red colors

Figure 5: The BRONC Staves machine is available in multiple color options.

4. Կարգավորում

4.1 Սարքի լիցքավորում

Before initial use, fully charge the machine. The integrated 1800mAh battery provides approximately 4-7 hours of working time. Charging takes 2-2.5 hours using the provided Type-C fast charge cord.

  • Connect the Type-C cable to the charging port on the machine.
  • Միացրեք մալուխի մյուս ծայրը համատեղելի USB սնուցման ադապտերին (չի մատակարարվում):
  • The OLED display will indicate charging status.
BRONC Staves Tattoo Machine connected to a Type-C charger

Figure 6: Charging the BRONC Staves machine via Type-C port.

4.2 Installing and Adjusting Needle Cartridges

The BRONC Staves machine is compatible with most standard integrated needle cartridges (suitable for over 90% of tattoo pens on the market).

  1. Insert the desired needle cartridge into the machine's rotary needle output.
  2. Twist the grip to adjust the needle depth. The adjustable range is 0-4mm.
  3. The machine has a fixed stroke length of 3.5mm.
Close-up of the BRONC Staves machine showing replaceable stroke and needle depth adjustment

Figure 7: Adjusting needle depth and noting the fixed stroke length.

BRONC Staves machine with a needle cartridge installed

Figure 8: The rotary needle output is designed for simple and convenient cartridge installation.

Example of a compatible needle cartridge

Նկար 9. Նախկինample of a compatible integrated needle cartridge.

4.3 RCA Converter (Wired Mode)

The machine includes an RCA converter for seamless transitions between independent wireless operation and traditional wired power supply use. To use wired mode, attach the RCA converter to the machine and connect it to an external power supply (not included).

5. Գործառնական հրահանգներ

5.1 Միացում/անջատում

Press and hold the power button (typically located on the OLED display panel) to turn the machine on or off.

5.2 Հզորության կարգավորումtage

The machine offers a voltage output range of 5.0V-12.0V, with a recommended working voltage of 5.5V-7.5V for optimal performance. Voltage can be adjusted in 0.1V increments.

  • Use the '+' and '-' buttons on the OLED display to increase or decrease the voltage.
  • Ներկայիս հատորtage setting is displayed on the OLED screen.
Close-up of the BRONC Staves machine's OLED display showing voltage and battery status

Figure 10: The OLED display provides clear information on battery status and voltage.

Close-up of the BRONC Staves machine's three-button control panel

Figure 11: The three-button design allows for easy operation.

5.3 Jump Start Feature

The machine includes a 0.2-second 9V jump start feature to assist with starting larger needle configurations or when a quick power boost is needed.

6. Պահպանում

6.1 Մաքրում և ստերիլիզացում

Proper cleaning and sterilization are crucial for hygiene and machine longevity.

  • Always disconnect the machine from any power source before cleaning.
  • Wipe down the exterior of the machine with a suitable disinfectant wipe or spray.
  • Մի ընկղմեք մեքենան հեղուկների մեջ:
  • Վերամոնտաժելուց կամ պահեստավորելուց առաջ համոզվեք, որ բոլոր բաղադրիչները չոր են։

6.2 Մարտկոցի խնամք

  • Խուսափեք մարտկոցի պարբերաբար լրիվ լիցքաթափումից՝ դրա կյանքը երկարացնելու համար։
  • Պահպանեք մեքենան զով, չոր տեղում, երբ այն չի օգտագործվում:
  • Charge the battery periodically if the machine is stored for extended periods.

7: Անսարքություն

If you encounter issues with your BRONC Staves Wireless Tattoo Machine, refer to the following common troubleshooting steps:

  • Մեքենան չի միանում. Ensure the battery is sufficiently charged. Connect the Type-C charger and attempt to power on.
  • Inconsistent Power/Stuttering: Check the battery level. If using wired mode, ensure the RCA connection is secure and the external power supply is functioning correctly.
  • Needle Not Moving Correctly: Verify that the needle cartridge is properly installed and not damaged. Check for any obstructions in the needle output mechanism.
  • Ավտոմատ անջատում. Մեքենան հագեցած է overload and overcurrent protection. If it shuts down unexpectedly, this may indicate an internal issue or excessive load. Disconnect the machine, allow it to cool, and then attempt to restart. If the issue persists, contact customer support.
  • OLED Display Not Responding: Ensure the machine is powered on. If the display remains unresponsive, try charging the device.

8. Տեխնիկական պայմաններ

ԱռանձնահատկությունՄանրամասն
Մոդելի համարըRTM-1003-99-4
Մարտկոցի հզորությունը1800 mAh լիթիում պոլիմեր
Լիցքավորման ժամանակ2-2.5 hours (Type-C Fast Charge)
Աշխատանքային ժամանակ4-7 ժամ
ՇարժիչSwiss DC Motor
Առանց բեռի արագություն12000 rpm
Կաթվածի երկարությունը3.5 մմ (ֆիքսված)
Ասեղի խորություն0-4 մմ (կարգավորելի)
Հատtage Արդյունքների տիրույթ5.0V-12.0V
Recommended Working Voltage5.5V-7.5V
Հատtagե Կարգավորում0.1V աճեր
Jump Start Feature0.2 second 9V pulse
Քաշը190 գ (ներառյալ մարտկոցը)
Չափերը135mm length, 27mm diameter
ՆյութAircraft-Grade Aluminum Alloy
Ջրի դիմադրության մակարդակըՋրակայուն

9. Արտադրանքի տեսանյութ

Video 1: An official product video demonstrating the BRONC Staves Wireless Rotary Cartridge Tattoo Machine Pen.

10. Երաշխիք և աջակցություն

The product is subject to a 30-օրյա վերադարձի քաղաքականություն. For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact BRONC customer support through your purchase platform or the official BRONC webկայք։

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.