1. Ներածություն
This manual provides detailed instructions for the installation, operation, and maintenance of your Generic Dash Cam, specifically designed as an accessory for the BYD Atto 3 EV. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
2. Ապրանքը ավարտված էview
The Generic Dash Cam is a compact, high-definition camera accessory intended to integrate seamlessly with your BYD Atto 3 EV's existing system. This package includes the camera unit only, designed for vehicles that already have the necessary wiring installed.
Պատկեր 2.1: Առջևի և հետևի view of the dash cam unit. The front features the camera lens, while the back shows the blue connector port.
Հիմնական հատկանիշները:
- Designed for BYD Atto 3 EV compatibility.
- Plug-and-play installation (camera only variant).
- 1080p video capture resolution.
- 120-degree wide-angle lens.
3. Կարգավորում և տեղադրում
Before beginning installation, ensure your vehicle is turned off and the ignition is disengaged. This dash cam is designed for a plug-and-play setup, assuming your BYD Atto 3 EV has the factory-installed wiring for a dash cam.
- Identify the Dash Cam Port: The BYD Atto 3 EV features blue and white ports on its main unit. The white port is typically for the car monitor (interior), while the blue port is designated for the dash cam. Locate the blue connector port in your vehicle. If you find a cable already plugged into the blue connector, your car has a factory-installed cable, and this camera-only unit is suitable for direct connection.
- Տեղադրեք տեղադրման տարածքը. The dash cam is typically installed near the rearview mirror or within the overhead console area. Carefully remove any trim panels as needed to access the camera mounting point and wiring.
- Connect the Dash Cam: Align the blue connector on the dash cam with the corresponding blue port in your vehicle's wiring harness. Gently push until it clicks into place, ensuring a secure connection.
- Ապահովեք տեսախցիկը. Mount the dash cam securely in its designated slot. Ensure the lens has a clear, unobstructed view առջևի ճանապարհին:
- Reassemble Trim (if applicable): Carefully reattach any trim panels removed during the installation process.
Պատկեր 3.1: Illustration of the blue connector port on the vehicle's main unit, indicated by a yellow circle and arrow. This is where the dash cam connects.
Պատկեր 3.2: The dash cam unit installed in the overhead console area, highlighted by a yellow dotted circle.
Պատկեր 3.3: Խոշոր պլանով view of the connection point for the dash cam, showing the blue connector.
Պատկեր 3.4: The dash cam unit securely mounted in its housing, with the lens visible.
4. Գործառնական հրահանգներ
Once properly installed, the Generic Dash Cam is designed to operate automatically in conjunction with your BYD Atto 3 EV's system. It typically begins recording when the vehicle is powered on and stops when the vehicle is turned off.
- Ավտոմատ ձայնագրում. The dash cam will automatically start recording video when the vehicle's ignition is turned on.
- Տեսանյութերի պահպանում. Ձայնագրված էtage is typically stored on the vehicle's integrated storage system or a compatible memory card (if applicable and supported by the vehicle's system). Refer to your BYD Atto 3 EV's infotainment manual for details on accessing and managing dash cam footage.
- Viewing Footage: Ֆուtage can usually be viewed directly through the vehicle's infotainment screen.
5. Պահպանում
To ensure optimal performance and longevity of your dash cam, follow these maintenance guidelines:
- Ոսպնյակի մաքրում. Periodically clean the camera lens with a soft, dry, lint-free cloth. Avoid abrasive materials or harsh chemicals that could scratch the lens.
- Բնապահպանական պայմաններ. Avoid exposing the dash cam to extreme temperatures or direct sunlight for prolonged periods when the vehicle is parked, as this can affect performance and lifespan.
- Fրագրակազմի թարմացումներ. Check with your BYD service center or the dash cam manufacturer for any available firmware updates that may improve performance or add features.
6: Անսարքություն
If you encounter issues with your dash cam, refer to the following common problems and solutions:
| Խնդիր | Հնարավոր պատճառ | Լուծում |
|---|---|---|
| Dash cam not recording or not detected. | Loose connection, incorrect port, vehicle system issue. | Ensure the blue connector is securely plugged into the correct blue port. Check your vehicle's infotainment system settings for dash cam detection. |
| Տեսանյութի վատ որակ: | Dirty lens, environmental factors (fog, glare). | Clean the camera lens. Ensure the windshield area in front of the camera is clear. |
| Intermittent recording. | Power supply issue, vehicle system conflict. | Verify the connection is stable. Consult your BYD service center if the issue persists, as it may relate to the vehicle's power management for accessories. |
7. Տեխնիկական պայմաններ
Below are the technical specifications for the Generic Dash Cam (Model B0BYDBKB7F):
- Ապրանքանիշը: Ընդհանուր
- Մոդելի համարը: B0BYDBKB7F
- UPC: 767951222621
- Ապրանքի չափսերը. 1.2"Երկարություն x 1.57"Լայնություն x 1.1"Բարձրություն
- Նյութի Քաշը: 300 գրամ
- Համատեղելի սարքեր. Monitor (BYD Atto 3 EV integrated system)
- Օպտիկական սենսորային տեխնոլոգիա. CMOS
- Ոսպնյակի տեսակը: Լայնանկյուն, ֆիքսված
- Իրական անկյուն View: 120 աստիճան
- Միակցիչի տեսակը: RCA (integrated into vehicle system)
- Տեսանյութի նկարահանման լուծում. 1080p
- Արտադրող: BYD (as per product data)
- Ներառված բաղադրիչներ. Տեսախցիկի միավոր
For internal reference, the part number may include 15339418SJR10301671.
8. Երաշխիք և աջակցություն
This Generic Dash Cam comes with a 1 տարվա երաշխիք գնման օրվանից։ Այս երաշխիքը ներառում է արտադրական թերությունները և անսարքությունները նորմալ օգտագործման դեպքում։
For warranty claims, technical support, or any questions not covered in this manual, please contact the seller or your authorized service provider. Please have your purchase receipt and product model number (B0BYDBKB7F) available when contacting support.