1. Ներածություն
This manual provides detailed instructions for the installation, operation, and maintenance of your ELUTENG M.2 NVMe/SATA SSD Enclosure. This device is designed to convert M.2 NVMe or SATA SSDs into a portable external storage solution, offering high-speed data transfer and broad compatibility.
2. Փաթեթի բովանդակությունը
Խնդրում ենք ստուգել, որ բոլոր իրերը առկա են ձեր փաթեթում։
- ELUTENG M.2 NVMe/SATA SSD Enclosure
- 2-in-1 USB Type-C Cable (USB-C to USB-A and USB-C to USB-C)
- Ջերմային պահոց
- Օգտագործողի ձեռնարկ (այս փաստաթուղթը)
3. Տեխնիկական պայմաններ
| Առանձնահատկություն | Նկարագրություն |
|---|---|
| Մոդել | M.2 SATA/NVME Enclosure |
| Ինտերֆեյս | USB 3.2 Gen 2 Type-C |
| Տվյալների փոխանցման արագություն | Up to 10Gbps (NVMe SSD), Up to 5Gbps (SATA SSD) |
| Աջակցվող SSD տեսակներ | M.2 NVMe M Key / B+M Key, M.2 NGFF SATA B+M Key |
| Աջակցվող SSD չափերը | 2230, 2242, 2260, 2280 |
| Առավելագույն հզորություն | 4 ՏԲ |
| Չիպսեթ | RTL9210B (Supports UASP, Trim) |
| Նյութ | Ալյումինե խառնուրդ |
| Չափերը | Մոտավորապես 4.92 x 2.83 x 0.67 դյույմ |
| Քաշը | Մոտ 60 գրամ (2.12 ունցիա) |
| OS Համատեղելիություն | Windows 7/8/10/11, Mac OS, Linux, iOS, Android |
| Սարքի համատեղելիություն | PC, Smartphone, Tablet, Smart TV, Smart Router, PS4 |
4. Կարգավորման ուղեցույց
4.1 SSD-ի տեղադրում
Հետևեք այս քայլերին՝ ձեր M.2 SSD-ն պատյանի մեջ տեղադրելու համար.
- Բացեք պատյանը՝ Push the switch on the side of the enclosure and slide out the inner frame.
- Տեղադրեք SSD-ն՝ Carefully insert your M.2 NVMe or SATA SSD into the slot on the inner frame, aligning it with the card position. Ensure the SSD is fully seated.
- Անվտանգ SSD: Install the provided fixing buckle (plastic push-pin) to secure the SSD in place. Rotate it 90 degrees counter-clockwise to lock.
- Կիրառեք ջերմային բարձիկը՝ Place the thermal pad onto the SSD chips to aid in heat dissipation.
- Փակել պարիսպը. Slide the inner frame back into the aluminum alloy shell until it clicks securely into place.

4.2 Սարքի միացում
Use the included 2-in-1 USB Type-C cable to connect the enclosure to your computer or other compatible device. The cable supports both USB-C to USB-A and USB-C to USB-C connections.

Նշում. For optimal performance, ensure your device has USB 3.0 or higher USB ports.
5. Գործառնական հրահանգներ
5.1 Տվյալների փոխանցում
Once connected, your operating system should automatically detect the ELUTENG M.2 SSD Enclosure as an external storage device. You can then drag and drop files, or use your system's file կառավարման գործիքներ տվյալների փոխանցման համար։
- NVMe SSD: Supports transfer rates up to 10Gbps.
- SATA SSD: Supports transfer rates up to 5Gbps.
The enclosure utilizes the RTL9210B main control chip, supporting UASP (USB Attached SCSI Protocol) and Trim commands to enhance read/write efficiency and reduce CPU load.

5.2 SSD համատեղելիություն
The enclosure supports a wide range of M.2 SSDs:
- NVMe SSDs: M Key and B+M Key.
- SATA SSDs: B+M Key (NGFF).
- Չափերը: 2230, 2242, 2260, and 2280 form factors.

6. Պահպանում
6.1 Ջերմության ցրում
The ELUTENG M.2 SSD Enclosure features an aluminum alloy shell and a bottom heat sink hole design. This construction facilitates efficient heat transfer away from the SSD, preventing overheating and maintaining optimal performance during extended use.

6.2 Մաքրում
To clean the enclosure, use a soft, dry cloth. Avoid using liquid cleaners or solvents, as these may damage the finish or internal components.
7: Անսարքություն
- Պարիսպը չի հայտնաբերվել՝
- Համոզվեք, որ SSD-ն ճիշտ է տեղադրված և ամրացված է պատյանի մեջ։
- Try connecting the enclosure to a different USB port on your device.
- Եթե հնարավոր է, փորձարկեք այլ USB մալուխով։
- Հնարավորության դեպքում ստուգեք SSD-ի գործունակությունը՝ այն փորձարկելով մեկ այլ համատեղելի սարքի վրա։
- For new SSDs, ensure they are initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (Mac OS).
- Դանդաղ փոխանցման արագություն.
- Ensure you are connected to a USB 3.0 (or higher) port on your device. Older USB 2.0 ports will significantly limit speeds.
- Confirm that your SSD is an NVMe drive for 10Gbps speeds; SATA drives will operate at up to 5Gbps.
- Փակեք այլ ծրագրերը, որոնք կարող են սպառել համակարգի ռեսուրսներ կամ սկավառակի մուտք/ելք։
- Check the health of your SSD.
- Enclosure gets hot:
- It is normal for the aluminum alloy shell to become warm during operation, especially during heavy data transfers, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad is correctly placed on the SSD chips.
8. Պաշտոնական արտադրանքի տեսանյութեր
Video: M.2 NVME SSD USB Adapter SSD Enclosure. This video provides a visual overview of the ELUTENG M.2 NVME SSD USB Adapter Enclosure, demonstrating its features and design.
Video: ELUTENG M.2 NVME SATA SSD Enclosure Aluminum. This video showcases the aluminum design and dual NVME/SATA compatibility of the ELUTENG M.2 SSD Enclosure.
9. Երաշխիքային տեղեկատվություն
ELUTENG products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact ELUTENG customer support.
10. Աջակցություն
If you encounter any issues or have questions regarding your ELUTENG M.2 NVMe/SATA SSD Enclosure, please contact our customer support team. Contact information can typically be found on our official webկայքում կամ ապրանքի փաթեթավորման վրա։