Bewinner H310M-S2

Bewinner H310M-S2 Motherboard User Manual

LGA 1151, M-ATX for 8th/9th Gen Intel Core Processors

1. Ներածություն

This manual provides detailed instructions for the installation, operation, and maintenance of your Bewinner H310M-S2 Motherboard. Please read this manual thoroughly before installing or using the product to ensure correct setup and optimal performance. This motherboard is designed to support 8th and 9th generation Intel Core i9, i7, i5, and i3 processors, as well as Pentium and Celeron series processors, utilizing the LGA 1151 socket.

2. Անվտանգության տեղեկատվություն

Տեղադրման և շահագործման ընթացքում պահպանեք հետևյալ անվտանգության միջոցառումները.

  • Միշտ անջատեք համակարգչի սնուցման աղբյուրը որևէ բաղադրիչ տեղադրելուց կամ հեռացնելուց առաջ։
  • Մայրական սալիկին կամ այլ բաղադրիչներին դիպչելուց առաջ կրեք հակաստատիկ դաստակի ժապավեն կամ հաճախակի դիպչեք հողանցված մետաղական առարկայի՝ ստատիկ էլեկտրականությունը լիցքաթափելու համար։
  • Մայրական սալիկը բռնեք եզրերից՝ զգայուն մասերին դիպչելուց խուսափելու համար։
  • Ապահովեք համակարգչի պատյանի պատշաճ օդափոխություն՝ գերտաքացումը կանխելու համար։
  • Մայրական սալիկը պահեք խոնավությունից և ծայրահեղ ջերմաստիճաններից հեռու։

3. Փաթեթի բովանդակությունը

Ստուգեք, որ բոլոր իրերը առկա են ձեր փաթեթում.

  • Bewinner H310M-S2 Motherboard
  • I/O Backplate

Եթե ​​որևէ իր բացակայում է կամ վնասված է, խնդրում ենք կապվել ձեր վաճառողի հետ։

4. Ապրանքը ավարտված էview

The Bewinner H310M-S2 is a micro-ATX motherboard featuring the Intel H310 Express Chipset. It is designed for robust performance in home, office, and gaming environments.

Վերևից ներքև view of the Bewinner H310M-S2 motherboard

Պատկեր՝ վերևից ներքև view of the Bewinner H310M-S2 motherboard, showcasing the LGA 1151 CPU socket, two DDR4 DIMM slots, PCIe slots, SATA ports, and various headers.

Հիմնական հատկանիշները:

  • CPU Համատեղելիություն. Supports 8th and 9th Gen Intel Core i9/i7/i5/i3, Pentium, and Celeron processors (LGA 1151).
  • Հիշողություն: Dual-channel DDR4 architecture with 2 DIMM slots, supporting up to 32GB at 2666/2400/2133 MHz.
  • Ընդլայնման Slots: 1x PCI Express x16 (PCIe 3.0) and 2x PCI Express x1 (PCIe 2.0).
  • Պահպանում: 4x Serial ATA 6Gb/s interfaces and 1x M.2 slot.
  • Աուդիո: Realtek ALC887 codec for 2/4/5.1/7.1 channel output.
  • Ցանց: Realtek LAN chip (10/100/1000 Mbit).
  • Տեսանյութի ելքեր. D-Sub (VGA) port.

5. Կարգավորում և տեղադրում

Մայրական սալիկի և դրա բաղադրիչների ճիշտ տեղադրման համար հետևեք այս քայլերին։

5.1. CPU տեղադրում

  1. Մայրական սալիկի վրա գտեք LGA 1151 պրոցեսորի միակցիչը։
  2. Զգուշորեն սեղմեք բեռնման լծակը ներքև և քաշեք այն կողքի՝ պրոցեսորի միակցիչի պահող շրջանակը բացելու համար։
  3. Carefully align the notches on your Intel LGA 1151 CPU with the corresponding keys on the socket. Ensure the gold triangle on the CPU matches the triangle on the socket.
  4. Place the CPU into the socket without forcing it. It should sit flat.
  5. Փակեք պահող շրջանակը և բեռնման լծակը հետ մղեք իր կողպված դիրքում։
LGA 1151 պրոցեսորի միակցիչի և DDR4 RAM-ի բնիկների խոշորացված պատկեր

Պատկեր՝ խոշոր պլան view of the LGA 1151 CPU socket with its retention mechanism and the two adjacent DDR4 memory slots.

5.2. Հիշողության (RAM) տեղադրում

  1. Գտեք երկու DDR4 DIMM անցքերը։
  2. Բացեք DIMM բնիկի երկու ծայրերում գտնվող սեղմակները։
  3. DDR4 հիշողության մոդուլի վրայի կտրվածքը համապատասխանեցրեք DIMM անցքի մեջ գտնվող բանալու հետ։
  4. Հիշողության մոդուլը ամուր մտցրեք անցքի մեջ, մինչև սեղմակները ամրացվեն իրենց տեղում։ Համոզվեք, որ երկու սեղմակներն էլ փակ են։

5.3. Պահեստային սարքի տեղադրում (M.2 և SATA)

5.3.1. M.2 SSD-ի տեղադրում

  1. Տեղադրեք M.2 բնիկը մայր տախտակի վրա:
  2. Հեռացրեք M.2 հենակետային պտուտակը։
  3. Insert your M.2 SSD into the slot at a 30-degree angle.
  4. Զգուշորեն սեղմեք M.2 SSD-ն ներքև և ամրացրեք այն ամրացնող պտուտակով։

5.3.2. SATA սկավառակի տեղադրում

  1. Connect one end of a SATA data cable to one of the four SATA 6Gb/s ports on the motherboard.
  2. SATA տվյալների մալուխի մյուս ծայրը միացրեք ձեր SATA կոշտ սկավառակին կամ SSD-ին։
  3. Միացրեք SATA սնուցման մալուխը ձեր սնուցման բլոկից (PSU) SATA սկավառակին։
Close-up of PCIe slots and M.2 slot on motherboard

Պատկեր՝ խոշոր պլան view of the PCI Express x16 slot, PCI Express x1 slots, and the M.2 slot, indicating expansion and storage options.

5.4. Ընդլայնման քարտի տեղադրում (PCIe)

  1. Locate the desired PCI Express x16 or x1 slot.
  2. Remove the corresponding expansion slot cover from your computer case.
  3. Align your expansion card (e.g., graphics card, sound card) with the slot and press it firmly until it is fully seated.
  4. Ամրացրեք քարտը պատյանին պտուտակով։

5.5. Առջևի վահանակի և ծայրամասային սարքերի միացում

Connect the cables from your computer case (e.g., power button, reset button, USB ports, audio jacks, speaker) to the corresponding headers on the motherboard. Refer to the motherboard layout for exact header locations.

  • Առջևի վահանակի վերնագիր՝ For power button, reset button, HDD LED, power LED.
  • Front Panel Audio Header: For front audio jacks.
  • USB 3.1 Gen 1 Header: For front USB 3.0 ports.
  • USB 2.0/1.1 Headers: For front USB 2.0 ports.

5.6. Էլեկտրաէներգիայի միացում

  1. Connect the 24-pin ATX main power connector from your PSU to the 24-pin power socket on the motherboard.
  2. Connect the 4-pin ATX 12V power connector from your PSU to the 4-pin power socket near the CPU.
  3. Connect the CPU fan to the CPU fan header and any system fans to the system fan headers.

6. Գործում

6.1. Սկզբնական բեռնում

After completing all hardware installations, connect your monitor, keyboard, and mouse. Power on your computer. The system should boot up and display the BIOS/UEFI splash screen. If it does not, refer to the Troubleshooting section.

6.2. BIOS/UEFI կարգավորում

To enter the BIOS/UEFI setup utility, press the designated key (usually ԴԵԼ or F2) during the initial boot sequence. Within the BIOS/UEFI, you can configure system settings such as boot order, date/time, and hardware parameters. Save changes before exiting.

7. Պահպանում

7.1. Մաքրում

Պարբերաբար մաքրեք ձեր համակարգչի ներսը՝ փոշու կուտակումը կանխելու համար, որը կարող է հանգեցնել գերտաքացման: Օգտագործեք սեղմված օդ՝ օդափոխիչներից, ռադիատորներից և մայրական սալիկի բաղադրիչներից փոշին հեռացնելու համար: Մաքրելուց առաջ համոզվեք, որ համակարգը անջատված է և վարդակից հանված է:

7.2. BIOS/UEFI թարմացումներ

Պարբերաբար ստուգեք արտադրողի website for updated BIOS/UEFI versions. Updating the BIOS/UEFI can improve system stability, compatibility, and performance. Follow the instructions provided by the manufacturer carefully when performing an update.

8: Անսարքություն

Այս բաժինը անդրադառնում է այն տարածված խնդիրներին, որոնց կարող եք հանդիպել։

8.1. Հոսանք չկա / Համակարգը չի միանում

  • Check if the power supply unit (PSU) is properly connected to the wall outlet and switched on.
  • Ensure the 24-pin ATX and 4-pin ATX 12V power connectors are securely seated on the motherboard.
  • Ստուգեք, որ առջևի վահանակի սնուցման կոճակի մալուխը ճիշտ է միացված մայրական սալիկի գլխիկին։
  • Test the PSU with another system or a PSU tester if available.

8.2. Էկրանի ելք չկա

  • Ensure your monitor is connected to the correct video output port (either on the motherboard or a dedicated graphics card).
  • Check if the graphics card (if installed) is properly seated in its PCIe slot and has adequate power connected.
  • Վերադրեք RAM մոդուլները։ Սխալ տեղադրված RAM-ը էկրանի բացակայության տարածված պատճառ է։
  • Փորձեք բեռնավորել համակարգիչը տեղադրված միայն մեկ RAM մոդուլով։

8.3. Համակարգի անկայունություն / խափանումներ

  • Ստուգեք գերտաքացումը։ Համոզվեք, որ պրոցեսորի սառեցուցիչը ճիշտ է տեղադրված և օդափոխիչները պտտվում են։
  • Verify that all power connectors are secure.
  • Գործարկեք հիշողության ախտորոշիչ գործիքները՝ անսարք RAM-ը ստուգելու համար:
  • Ensure drivers for all components are up-to-date.

9. Տեխնիկական պայմաններ

ԱռանձնահատկությունՀստակեցում
Նյութի տեսակըՀամակարգչի մայր տախտակ
ՆյութPCB
Համատեղելի պրոցեսորներLGA1151 interface, support for 9th and 8th Gen Core i9 i7 i5 i3, Pentium, Celeron processors
ՉիպսեթIntel H310 Express Chipset
Հիշողություն2 DDR4 DIMM slots, Dual Channel, up to 32GB, supports DDR4 2666/2400/2133 MHz
Պահպանման ինտերֆեյս4 Serial ATA 6Gb/s interfaces, 1 M.2 slot
Ընդլայնման slots1 PCI Express x16 slot (PCIe 3.0), 2 PCI Express x1 slots (PCIe 2.0)
Ձայնային չիպRealtek ALC887 codec, 2/4/5.1/7.1 channel output
Network ChipRealtek LAN chip (10/100/1000 Mbit)
Հետևի վահանակի միջերեսներ1 PS/2 keyboard, 1 PS/2 mouse, 1 D-Sub, 2 USB 3.1 Gen 1, 4 USB 2.0/1.1, 1 RJ-45, 3 sound jacks
Ներքին ինտերֆեյսներ1 24-pin ATX main power, 1 4-pin ATX 12V power, 1 CPU fan header, 1 system fan header, 1 front panel header, 1 front panel sound header, 1 USB 3.1 Gen 1 header, 1 USB 2.0/1.1 headers
Մարտկոցի տեսակըBuilt-in 240mAh CR2032 Battery (Included)

10. Երաշխիք և աջակցություն

10.1. Երաշխիքային տեղեկատվություն

This Bewinner H310M-S2 Motherboard comes with a manufacturer warranty for 90 days from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

10.2. Տեխնիկական աջակցություն

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Bewinner customer support through their official channels or the retailer where the product was purchased. You may find additional resources and driver downloads on the official Bewinner webկայք։