YARBO Remote Controller Designed User Manual

YARBO Remote Controller Designed

Տեխնիկական պայմաններ

Physical Controller Instructions for 2024 Lawn Mower

• This guide offers instructions on using the Yarbo physical controller to operate your Yarbo lawn mower with maximum efficiency. Featuring intuitive controls for speed, mower operations, and other key settings, the controller enables seamless handling for various tasks. Follow these guidelines to master the controller and unlock the full potential of your Yarbo lawn mower.

Միացում

Վերահսկիչի սեփականատեր

1. Locate the Physical Controller Holder provided in the Yarbo Core package and locate the side button on the Holder.
2. Locate the shafts and holes and press the buttons on both sides of the Holder, and then press the middle part as shown in the picture.

Կոճակի ներածություն

Yarbo Logo Button:

• Logo button can be used to power on or off the controller. To power on the controller, short-press the Logo button for 1 second. To power off, press the Logo buttons for 3 seconds. If the controller is not in use, it will automatically power off after 5 minutes.

Yarbo connecting mode

• Phone Connecting Mode

RB&LB (Safety button):

• RB and LB are designed to be the safety buttons, which means that either of these two buttons should be pressed throughout most of the operation. Except for the X/A/B/Y buttons and D-pad buttons, the rest of the buttons should be pressed with the RB/LB button to execute its function.

Switch & Clear Button:

• Long-press the switch or clear button for seconds to take over the control authority. Once the physical controller gains authority, you can operate the lawn mower.
• Short press the switch or clear button to exit the error mode. When Yarbo encounters the dangers or stuck by any obstacles, it will stop and enters the error mode. After the dangers are cleared, pressed the start or clear button to exit the erorr mode.

RB & LB (Safety button):

• RB and LB are designed as safety buttons, which means that one of the buttons should be pressed throughout most of the operation that may cause dangerous result. Except for the X/A/B/Y buttons and D-pads, the rest of the function buttons must be pressed with one of the safety buttons to execute their own functions.

Left Joystick and Right Joystick:

• These two joysticks control the direction of movement and speed of the robot. Press the safety button (RB/LB) and rotate the stick around to control Yarbo’s movement in any direction. Press the left and right sticks vertically down to switch between two-speed settings (L3, R3 button).

LT + RT Button:

• Keep the safety button pressed (RB/LB) and long press the LT+RT buttons for 2 to 3 seconds to open the cutting discs.

Ուղղորդող վահանակ (D-pad):

• Press the up and down button to control the cutting discs height.

Y կոճակ:

• This button controls the lawn mower module to pitch up. Press and hold the button to continuously pitch up the lawn mower module until it reaches the highest position. Release the button to stop at the current angle.

Կոճակ.

• This button controls the lawn mower module to pitch down. Press and hold the button to continuously pitch down the Lawn Mower Module until it reaches the lowest position. Release the button to stop at the current angle.

B կոճակ.

• Press this button to turn on and off the front lights (default setting is on)

X կոճակ:

• Press this button to turn on and off all the lights (default setting is on)

Battery Indicator Button and Controller Light Button:

• Մարտկոցի ցուցիչի կոճակ: Check Yarbo’s battery status at any time.
• Controller Light Button: Turn on the controller’s lights for better visibility during night or low-light operations.

Առանձնահատկություններ

• Համընդհանուր համատեղելիություն: Works with a wide range of devices such as smart TVs, projectors, air conditioners, and more.
• Էրգոնոմիկ դիզայն: Comfortable, easy-to-hold design for prolonged use.
• Ընդլայնված տեխնոլոգիա: Utilizes infrared (IR) or Bluetooth connectivity depending on the model.
• Ծրագրավորվող կոճակներ: Customizable buttons for frequently used functions.
• Երկար մարտկոցի կյանք: Energy-efficient design that lasts for extended periods on a single battery.

Ինչպես օգտագործել

Քայլ 1. Միացնելը

• Press the Power button on the remote to turn it on. The LED indicator will blink, signaling that the remote is ready to pair with a device.

Քայլ 2. Հեռակառավարման վահանակի զուգակցում

• For IR-Controlled Devices:
  • Simply point the remote at the device you wish to control (e.g., TV, air conditioner).
  • Use the device-specific buttons (e.g., power, volume, input) to test the connection.
• For Bluetooth-Controlled Devices:
  • Press and hold the Bluetooth Pairing button (if applicable) for about 3-5 seconds until the LED indicator starts blinking rapidly.
  • On your device (e.g., smart TV or Bluetooth-enabled device), activate the Bluetooth pairing mode.
  • Select the YARBO Remote Controller from the list of available devices.

Step 3: Using the Buttons

• Այն YARBO Remote Controller features a range of customizable buttons for controlling devices:
  • Իշխանություն: Turns the device on/off.
  • Ձայնի բարձրացում/ՆվազումԿարգավորում է ձայնի մակարդակը:
  • Channel Up/Down: Changes channels (for TVs or similar devices).
  • Մուտքագրում: Switches between different input sources (HDMI, TV, etc.).
  • Պատվերով կոճակներ: Some models feature programmable buttons for quick access to your most-used functions. Refer to the next section for programming instructions.

Քայլ 4. Կարգավորումների կարգավորում

• Պայծառություն և հակադրություն (for compatible devices): Adjust the settings directly from the remote control.
• Ռեժիմի անջատիչ (for air conditioners or other smart devices): Cycle between modes like Cool, Heat, Fan, etc.

Անսարքությունների վերացում